Subaru Crosstrek Service Manual: Dtc b1795 occupant detection module internal circuit
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble Code
DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUIT
NOTE:
Refer to “Occupant Detection System” for details on DTC B1795. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUIT">
Dtc b1771 buckle switch
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1771 BUCKLE SWITCHNOTE:Refer to “Occupant Detection System” for details on DTC B1771. Diagnostic Procedure with Dia ...
Dtc u0073 control module communication bus off
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC U0073 CONTROL MODULE COMMUNICATION BUS OFFDiagnosis start condition:Ignition voltage remains at 10 V or more for 1 second.DTC det ...
Other materials:
Vehicle Dynamics Control warning light/ Vehicle Dynamics Control operation indicator
light
Vehicle Dynamics Control warning light
CAUTION
In the Subaru Ascent, the Vehicle Dynamics Control (VDC) system relies on
the ABS through a shared electrical circuit. If the ABS system becomes inoperative
for any reason, the VDC system will also lose its ability to provide ABS-related
control ...
Disassembly
DRIVE SHAFT SYSTEM > Rear Drive ShaftDISASSEMBLY1. Remove the outer race (DOJ) from the shaft assembly.CAUTION:Be careful not to damage the boot.(1) Using a flat tip screwdriver or pliers, loosen the boot band on the large end of boot (DOJ).CAUTION:Be careful not to damage the boot.(2) Remove the ...
Disassembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorDISASSEMBLY1. Remove the cap from the generator.2. Remove four bolts.3. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — 140°F).4. Insert a flat tip screwdriver or similar tool wrapped with protective tape into ...
