Subaru Crosstrek Service Manual: Dtc b1615 front sub sensor lh failure
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble Code
DTC B1615 FRONT SUB SENSOR LH FAILURE
DIAGNOSIS START CONDITION:
Ignition voltage is 10 V to 16 V.
DTC DETECTING CONDITION:
Front sub sensor (LH) is faulty.
If DTC B1615 is displayed, the circuit within the front sub sensor (LH) is faulty.
Replace the front sub sensor (LH). Front Sub Sensor">
Dtc b1613 front sub sensor rh initialization error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1613 FRONT SUB SENSOR RH INITIALIZATION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition: ...
Dtc b1617 front sub sensor lh lost communication
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1617 FRONT SUB SENSOR LH LOST COMMUNICATIONNOTE:For details on DTC B1617, refer to DTC B1618. Diagnostic Chart with Trouble Cod ...
Other materials:
Airbag module disposal (deployment processing on vehicle) Procedure
AIRBAG SYSTEM > Airbag Module Disposal (Deployment Processing on Vehicle)PROCEDUREWARNING:Make sure to follow the instructions below. Otherwise, personal injuries may occur.• Before discarding an airbag module, always perform an operation process to prevent any false activation.• Wear ...
Installation
BRAKE > Rear Disc Brake AssemblyINSTALLATIONNOTE:Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake.1. Before installation, check each part. Rear Disc Brake Assembly > INSPECTION">2. Apply a thin coat of grease to the suppor ...
Installation
EXTERIOR BODY PANELS > Front DoorINSTALLATION1. FRONT DOOR PANEL1. Put a wooden block on a jack and place the panel assembly - front door on it.2. Apply grease to the sliding area of door hinges, and install the door hinge to vehicle.3. Adjust the height by the jack, and temporarily install the p ...
