Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc b1577 imm control module eeprom

KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC B1577 IMM CONTROL MODULE EEPROM

1. EXCEPT FOR C0 AND C5 MODELS

DTC detecting condition:

Defective keyless access CM

When inaccessible to ROM in keyless access CM.

STEPCHECKYESNO

1.CHECK DTC.

1) Turn the ignition switch to ON.

2) Perform the clear memory operation of ECM. Clear Memory Mode">

3) Turn the ignition switch to OFF.

4) Remove and install the battery.

5) Turn the ignition switch to ON.

6) After 5 seconds or more, read DTC. Read Diagnostic Trouble Code (DTC)">

Is DTC B1577 displayed?

Replace the keyless access CM. Keyless Access CM">

Even if DTC is displayed, the circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.

NOTE:

In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.

2. FOR C0 AND C5 MODELS

DTC detecting condition:

ID code box malfunction

When inaccessible to ROM in ID code box.

STEPCHECKYESNO

1.CHECK DTC.

1) Turn the ignition switch to ON.

2) Perform the clear memory operation of ECM. Clear Memory Mode">

3) Turn the ignition switch to OFF.

4) Register the ID code box.

5) Read the DTC again. Read Diagnostic Trouble Code (DTC)">

Is DTC B1577 displayed?

Replace the ID code box. ID Code Box">

Even if DTC is displayed, the circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.

NOTE:

In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.

Dtc b1576 egi control module eeprom
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1576 EGI CONTROL MODULE EEPROMDTC detecting condition:• ECM malfunctio ...

Dtc b1571 reference code incompatibility (immobilizer cm to ecm)
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)DTC detecting con ...

Other materials:

Read diagnostic trouble code (dtc) Operation
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select Sys ...

Weight
SPECIFICATIONS > CrosstrekWEIGHTModel5 door2.0 L DOHC non-turbo2.0 i5MTCVTOP codeU5C5U5C53A3A3A3ACurb weight (C.W.)Totalkg(lb)1,410(3,109)1,410(3,109)1,445(3,186)1,445(3,186)Frontkg(lb)825(1,819)825(1,819)865(1,907)865(1,907)Rearkg(lb)585(1,290)585(1,290)580(1,279)580(1,279)Gross vehicle weight ( ...

Installation
WHEEL AND TIRE SYSTEM > Tire Pressure Monitoring SystemINSTALLATION1. TRANSMITTER (TIRE INFLATION PRESSURE SENSOR)CAUTION:Use the new transmitter assembly or replace the new valve and screw, when installing.1. Replace the valve and screw with a new part when reusing transmitter.(1)Screw(2)Transmi ...

© 2016-2024 Copyright www.sucross.com