IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B1576 EGI CONTROL MODULE EEPROM
DTC DETECTING CONDITION:
• ECM malfunctioning
• Failed to access ROM in ECM during key registration.
CAUTION:
When the ECM is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
STEP | CHECK | YES | NO |
1.PERFORM ECM REGISTRATION.
Perform ECM registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1576 EGI CONTROL MODULE EEPROM">Go to Step 2.
2.PERFORM ECM REGISTRATION.
Perform ECM registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1576 EGI CONTROL MODULE EEPROM">Go to Step 3.
3.PERFORM ECM REGISTRATION.
Perform ECM registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Replace the ECM. Engine Control Module (ECM)">
Check eyesight steering switch
EyeSight (DIAGNOSTICS) > Diagnostics with PhenomenonCHECK EyeSight STEERING SWITCHTrouble symptom:• Cruise control cannot be set. (Cancelled immediately.)• Cruise control cannot be released.Wiring diagram:EyeSight System EyeSight System > WIRING DIAGRAM">STEPCHECKYESNO1.CH ...
Dtc u0423 invalid data received from instrument panel cluster control module
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULEReceived error data from combination meter.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic ...
Drain filter Specification
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Drain FilterSPECIFICATIONThe leak check valve assembly is a non-disassembled part. Do not remove the drain filter from the leak check valve assembly. Refer to “Leak Check Valve Assembly” for removal and installation procedures. ...