IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)
DTC DETECTING CONDITION:
Reference code incompatibility between body integrated unit and ECM
CAUTION:
When the body integrated unit is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
STEP | CHECK | YES | NO |
1.CONFIRM NUMBER OF REGISTERED IMMOBILIZER KEY.
Confirm the number of registered immobilizer key. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is the number of registration 0?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)">Go to Step 2.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)">Go to Step 3.
2.PERFORM IMMOBILIZER SYSTEM REGISTRATION.
Register the immobilizer system. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)">Go to Step 4.
3.PERFORM ECM REGISTRATION.
Perform ECM registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)">Go to Step 4.
4.CHECK FOR ANY OTHER DTC ON DISPLAY.
1) Perform the Clear Memory Mode. Clear Memory Mode">
2) Read the DTC of the ECM. Read Diagnostic Trouble Code (DTC)">
Is any other DTC displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)">Go to Step 5.
5.PERFORM ECM REGISTRATION.
1) Replace the ECM. Engine Control Module (ECM)">
2) Perform ECM registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Finish the diagnosis.
Replace the body integrated unit. Body Integrated Unit">
Certification for the Hands-free system
This device complies with Part 15 of FCC
Rules and Industry Canada's licenceexempt
RSSs. Operation is subject to
the following two conditions: (1) This
device may not cause harmful interference,
and (2) this device must accept any
interference received, including interference
that may cause u ...
Disassembly
DRIVE SHAFT SYSTEM > Front Hub Unit BearingDISASSEMBLYUsing the ST or a hydraulic press, push out the hub bolt (b) from the front hub unit bearing (a).CAUTION:• Be careful not to hammer the hub bolts. This may deform the hub unit bearing.• Do not reuse the hub bolt.NOTE:Since the hub ...
Installation
MECHANICAL(H4DO) > Crank PulleyINSTALLATION1. Degrease the press-fit section for the chain cover front oil seal, and install the front oil seal to the chain cover using ST.CAUTION:Do not apply fluid such as engine oil to the front oil seal and the chain cover; otherwise engine oil leakage may occ ...