Subaru Crosstrek Service Manual: Dtc b1570 antenna

DTC detecting condition:

Faulty antenna

CAUTION:

When the body integrated unit is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.

1.CHECK BODY INTEGRATED UNIT POWER SUPPLY CIRCUIT.

1) Turn the ignition switch to OFF.

2) Disconnect the connector from body integrated unit.

3) Measure the voltage between the body integrated unit connector terminal and chassis ground.

Connector & terminal

(i84) No. 6 (+) — Chassis ground (−):

Is the voltage 10 V or more?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 2.

Check the harness for open or short circuit between body integrated unit and fuse.

2.CHECK BODY INTEGRATED UNIT GROUND CIRCUIT (OPEN CIRCUIT).

Measure the resistance between the body integrated unit connector terminal and chassis ground.

Connector & terminal

(B280) No. 1 — Chassis ground:

(i84) No. 1 — Chassis ground:

Is the resistance less than 10 ??

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 3.

Repair the open circuit of the body integrated unit ground circuit.

3.CHECK ANTENNA POWER SUPPLY CIRCUIT.

1) Connect the connector to body integrated unit.

2) Disconnect the connector from the antenna.

3) Insert the ignition key into the key cylinder, then measure the voltage between the antenna connector terminal and the chassis ground.

Connector & terminal

(B415) No. 1 (+) — Chassis ground (−):

Is the voltage 5±0.5 V approx. 200 ms after inserting the ignition key into the key cylinder? And then, does the voltage return to 0 V within 2 s?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 5.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 4.

4.CHECK ANTENNA POWER SUPPLY CIRCUIT (OPEN).

1) Disconnect the connector from body integrated unit.

2) Measure the resistance of body integrated unit connector terminal and antenna connector terminal.

Connector & terminal

(B281) No. 2 — (B415) No. 1:

Is the resistance less than 10 ??

Replace the body integrated unit. Body Integrated Unit">

Repair the harness or connector between body integrated unit and antenna.

5.CHECK ANTENNA GROUND CIRCUIT (SHORT CIRCUIT TO GROUND).

Measure the resistance between antenna connector terminal and chassis ground.

Connector & terminal

(B415) No. 7 — Chassis ground:

Is the resistance less than 10 ??

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 7.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 6.

6.CHECK ANTENNA GROUND CIRCUIT (OPEN).

1) Disconnect the connector from body integrated unit.

2) Measure the resistance between the body integrated unit connector terminal and antenna connector terminal.

Connector & terminal

(B281) No. 30 — (B415) No. 7:

Is the resistance less than 10 ??

Replace the body integrated unit. Body Integrated Unit">

Repair the harness or connector between body integrated unit and antenna.

7.CHECK ANTENNA COMMUNICATION CIRCUIT (OPEN).

Measure the resistance of body integrated unit connector terminal and antenna connector terminal.

Connector & terminal

(B281) No. 10 — (B415) No. 5:

(B281) No. 22 — (B415) No. 4:

Is the resistance less than 10 ??

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1570 ANTENNA">Go to Step 8.

Repair the harness or connector between body integrated unit and antenna.

8.CHECK ANTENNA.

1) Replace the immobilizer antenna. Immobilizer Antenna">

2) Insert the ignition key in the ignition switch. (OFF or ACC)

3) Perform the Clear Memory Mode. Clear Memory Mode">

4) Read the DTC of the body integrated unit. Read Diagnostic Trouble Code (DTC)">

Is DTC B1411 detected?

Replace the body integrated unit. Body Integrated Unit">

Antenna has a failure.

Dtc b1411 immobilizer antenna

Dtc b1572 imm circuit except antenna circuit

Other materials:

Certification for keyless access with push-button start system
U.S.-spec. models FCC ID: HYQ14AHC FCC ID: HYQ13CZZ FCC ID: Y8PSSPIMB02 FCC ID: Y8PSSPLF02 CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This device complies with ...

Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reverse Brake AssemblyASSEMBLY1. Install the reverse brake piston.NOTE:Apply CVTF to the sealing area of reverse brake piston.2. Install the return spring.3. Install the spring retainer.4. Compress the return spring using the ST to install the snap ring ...

Dtc c2543 error passive
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2543 ERROR PASSIVETrouble symptom:The steering wheel operation feels heavy.STEPCHECKYESNO1.CHECK LAN SYSTEM.Perform the diagnosis for LAN system using the Subaru Select Monitor. Bas ...