IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B1406 SCU_EEPROM
DTC DETECTING CONDITION:
• Defective security control module
• ROM of security control module cannot be accessed
CAUTION:
When the security control module is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
STEP | CHECK | YES | NO |
1.PERFORM SECURITY CONTROL MODULE REGISTRATION.
1) Perform security control module registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
2) Perform the Clear Memory Mode. Clear Memory Mode">
3) Read the DTC of the body integrated unit. Read Diagnostic Trouble Code (DTC)">
Is DTC B1406 detected?
Replace the security control module. Security Control Module">
Finish the diagnosis.
Removal
SECURITY AND LOCKS > ReceiverREMOVALNOTE:Except for model with keyless entry1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear apron LH. Rear Quarter Trim > REMOVAL">3. Remove the receiver assembly.(1) Disconnect the connector.(2) Remove the bo ...
Removal
CONTROL SYSTEMS > AT Shift Lock Solenoid and “P” Range SwitchREMOVAL1. SOLENOID UNIT1. Remove the AT select lever. Select Lever > REMOVAL">2. Remove the spacer and gasket. Select Lever > DISASSEMBLY">3. Using a flat tip screwdriver with a thin tip, remove the h ...
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL">3. Remove the oil pump chain, oil ...