IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B1405 SCU COLLATION
DTC DETECTING CONDITION:
Reference code incompatibility between security control module and body integrated unit
CAUTION:
When the security control module is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
STEP | CHECK | YES | NO |
1.CHECK DTC.
Read the DTC of the body integrated unit. Read Diagnostic Trouble Code (DTC)">
Is any of DTC B1406 or B1409 detected?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1405 SCU COLLATION">Go to Step 2.
2.PERFORM SECURITY CONTROL MODULE REGISTRATION.
Perform security control module registration. Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
Is registration complete?
Currently, it is normal. (Security control module registration is not complete.)
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1405 SCU COLLATION">Go to Step 3.
3.CHECK DTC.
1) Perform the Clear Memory Mode. Clear Memory Mode">
2) Read the DTC of the body integrated unit. Read Diagnostic Trouble Code (DTC)">
Is any of DTC B1406 or B1409 detected?
Perform the diagnosis according to DTC.
Replace the security control module. Security Control Module">
Installation
PARKING BRAKE > Parking Brake LeverINSTALLATION1. Install each part in the reverse order of removal.CAUTION:• The front seat mounting bolts differ between the front mounting points and the rear mounting points. When installing the front seat, make sure that you are using correct bolts at co ...
Waveform
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Transmission Control Module (TCM) I/O SignalWAVEFORM1. SENSOR2. SOLENOID ...
Inspection
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingINSPECTION1. Moving the rear tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the rear hub unit bearing.2. Inspe ...