Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc b11f2 front impact deployment

AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble Code

DTC B11F2 FRONT IMPACT DEPLOYMENT

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

This DTC is indicated when the front airbag module and the pretensioner are deployed.

Once this DTC is displayed, the memory cannot be cleared. Therefore replace the following parts.

Airbag control module Airbag Control Module">

Driver’s airbag module Driver’s Airbag Module">

Passenger’s airbag module Passenger’s Airbag Module">

Driver’s knee airbag module Knee Airbag Module">

Front sub sensor of both sides Front Sub Sensor">

Front outer seat belt with pretensioner of both sides Front Seat Belt">

Steering roll connector Roll Connector">

Occupant detection system (passenger’s seat cushion & frame assembly) Front Seat">

Curtain airbag module on both sides (when activated) Curtain Airbag Module">

Dtc b11e0 rollover deployment history
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B11E0 ROLLOVER DEPLOYMENT HISTORYDIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:This DTC is i ...

Dtc b11f3 front impact deployment
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B11F3 FRONT IMPACT DEPLOYMENTNOTE:For details on DTC B11F3, refer to DTC B11F2. Diagnostic Chart with Trouble Code > DTC B11F ...

Other materials:

Wheel alignment Inspection
REAR SUSPENSION > Wheel AlignmentINSPECTIONNOTE:Measure and adjust the front and rear wheel alignment at a time. Refer to “Wheel Alignment” in “FRONT SUSPENSION” section for measurement or adjustment of wheel alignment.• Inspection: Wheel Alignment > INSPECTION&q ...

Removal
LIGHTING SYSTEM > Rear Combination Light AssemblyREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear ...

Removal
MECHANICAL(H4DO) > Cam CarrierREMOVAL1. CAM CARRIER RH1. Remove the engine from the vehicle. Engine Assembly > REMOVAL">2. Remove the chain cover. Chain Cover > REMOVAL">3. Remove the timing chain RH. Timing Chain Assembly > REMOVAL">4. Remove the cam sprocket ...

© 2016-2022 Copyright www.sucross.com