The items in the driving history can be registered. To change the items, operate the " " or " " switch, and then push the button.
1. Turn the ignition switch to the "ON" position.
2. Push and hold the button to show the selection screen.
3. After the selection screen is displayed, operate the " " or " " switch to show the "Driving History" item. Then, push the button.
4. Push the button once more to enter the setting mode.
5. The system will notify you of the place to be selected for approximately 2 seconds.
6. Select one of the registration lines by operating the " " or " " switch. Then push the button.
To overwrite the previous registration, push the button. When registration is performed the first time, it is registered directly without a notification.
8. The system will notify you that the registration is complete.
Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel PumpINSTALLATION1. Install the fuel pump assembly to the fuel tank.(1) Make sure the sealing portion is free from fuel or foreign matter before installation.(2) Align the protrusion (A) of the gasket to the position shown in the figure, and install the g ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Rear Oxygen SensorREMOVAL1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL">4. Disconnect the rear oxygen sensor connector.(A)Front oxygen (A/F) sensor connector(B)Rear oxygen ...
Rear wiring harness Location
WIRING SYSTEM > Rear Wiring HarnessLOCATIONConnectorConnecting toNo.PoleColorAreaNo.DescriptionR120C-1B97Bulkhead wiring harnessR320C-3B99R41BlackB-4 Parking brake switchR520C-3B92Bulkhead wiring harnessR93C-5 Front door switch LHR108B-5D22Rear door cord LHR123B-2 Front door switch RHR138B-3D28Re ...