WIRING SYSTEM > Door Cord
LOCATION
Connector | Connecting to | ||||
No. | Pole | Color | Area | No. | Description |
D1 | 8 | Black | C-2 | B30 | Bulkhead wiring harness |
D2 | 2 | C-4 | Front door speaker LH | ||
D3 | 6 | Dark gray | C-4 | Front power window motor LH | |
D5 | 10 | B-4 | Outer mirror assembly LH | ||
D7 | 16 | B-4 | Power window main switch | ||
D11 | 8 | Black | C-4 | B101 | Bulkhead wiring harness |
D12 | 2 | B-2 | Front door speaker RH | ||
D13 | 6 | Dark gray | B-3 | Front power window motor RH | |
D15 | 10 | B-2 | Outer mirror assembly RH | ||
D17 | 8 | B-3 | Front power window sub-switch | ||
D18 | 10 | B-3 | Front door lock actuator RH | ||
D22 | 8 | B-5 | R10 | Rear wiring harness LH | |
D23 | 2 | C-5 | Rear door speaker LH | ||
D24 | 6 | Dark gray | B-5 | Rear power window motor LH | |
D25 | 8 | B-5 | Rear power window sub-switch LH | ||
D26 | 10 | B-5 | Rear door lock actuator LH | ||
D28 | 8 | B-3 | R13 | Rear wiring harness RH | |
D29 | 2 | B-3 | Rear door speaker RH | ||
D30 | 6 | Dark gray | B-4 | Rear power window motor RH | |
D31 | 8 | B-3 | Rear power window sub-switch RH | ||
D32 | 10 | B-4 | Rear door lock actuator RH | ||
D56 | 6 | B-3 | Outer handle RH | ||
D66 | 6 | B-5 | Outer handle LH | ||
D72 | 10 | B-5 | Front door lock actuator LH | ||
D83 | 28 | B-2 | i76 | Instrument panel wiring harness | |
D84 | 28 | C-3 | i101 | ||
D102 | 3 | B-4 | Power window main switch | ||
D125 | 5 | B-2 | Passenger’s seat door lock switch | ||
D149 | 16 | C-4 | Remote control mirror switch | ||
: White or natural color |
Connector | Connecting to | ||||
No. | Pole | Color | Area | No. | Description |
AB58 | 2 | Yellow | C-5 | Front door impact sensor LH | |
AB62 | 2 | Yellow | C-3 | R123 | Rear wiring harness LH |
AB63 | 2 | Yellow | C-2 | R124 | Rear wiring harness RH |
AB64 | 2 | Yellow | B-3 | Front door impact sensor RH | |
: White or natural color |
Dtc p1493 coil 1 egr "a" control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1493 COIL 1 EGR "A" CONTROL CIRCUIT HIGHNOTE:For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1499 COIL 4 EGR "A" CONTRO ...
Inspection
SECURITY AND LOCKS > Push Button Ignition SwitchINSPECTION1. Check the continuity between push button ignition switch terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsSpecification4 (COM) — 5 (GND)AlwaysContinuity exists7 (SSW1) — 5 (GND)Push button ignition switch re ...
Removal
LIGHTING SYSTEM > License Plate LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the license plate light.(1) Release the claws and pull out the license plate light.(2) Disconnect the connector and remove the bulb socket and bulb from the license plate light.CAUTIO ...