Touch the tab to set display.
Item | Function |
Day/Night Mode | The "Auto", "Day" or "Night" key
can be selected on the pop-up
screen.
When the "Auto" key is selected, the screen changes to day or night mode depending on the position of the headlight switch. |
Brightness | Touch "+" or "−" to adjust the brightness. |
NOTE
How to adjust the rear view image
In the camera display, the brightness, tint, color and black level of the screen can be adjusted.
1. Depress the brake pedal fully and stop the vehicle.
2. While the vehicle is stopped, set the shift lever (MT models) or select lever (CVT models) in the "R" position, and then touch the display.
3. Touch the "Display Adjustment" key.
4. Touch the items to adjust the rear camera screen.
Camera display
WARNING
When adjusting camera display screen, make sure to depress the brake pedal fully to avoid the vehicle from moving. Failure to do so may lead to a serious accident.
NOTE
The camera display can be accessed when the rear camera monitor is displayed.
SUBARU STARLINK settings (if equipped)
Touch the tab to change the SUBARU STARLINK settings.
Item | Function |
Browser cache | Select to initialize cache files that the browser stores. If the confirmation screen appears and the "OK" key is selected, the cache files will be deleted. |
Caution
INTAKE (INDUCTION)(H4DO) > General DescriptionCAUTION• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary.2. Protect the vehicle using a seat cover, ...
General diagnostic table Inspection
CLUTCH SYSTEM > General Diagnostic TableINSPECTION1. CLUTCHSymptomsPossible causeCorrective action1. Clutch slippageIt is hard to perceive clutch slippage in the early stage, but pay attention to the following symptoms.• Engine temporarily speeds up when the accelerator ON immediately after ...
Adjustment
WIPER AND WASHER SYSTEMS > Rear Wiper ArmADJUSTMENT1. Operate the rear wiper once.2. Align the blade assembly - rear wipe with the marking on the glass.3. If the wiper blade is not aligned with the point mark, perform the removal of the rear wiper to align with the marking. Rear Wiper Arm > R ...