SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Assembly
DISASSEMBLY
1. Remove the screw and remove the sunroof motor.
2. Remove the stopper rubber and pull out the sunshade assembly from the rail assembly - sunroof.
3. Disconnect the claws and then remove the drain holder.
4. Remove the screw and pull out the cable assembly from the rail assembly - sunroof.
Installation
BRAKE > Brake BoosterINSTALLATION1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly ...
Dtc b1810 short in driver s airbag dual stage - 2nd step
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1810 SHORT IN DRIVER’S AIRBAG DUAL STAGE - 2ND STEPDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Airbag main harness circuit is shorted.• Airbag module harness (driver&rsq ...
Removal
EXTERIOR BODY PANELS > Front DoorREMOVAL1. FRONT DOOR PANEL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the sealing cover - front door. Front Sea ...