POWER ASSISTED SYSTEM (POWER STEERING) > Steering Wheel
DISASSEMBLY
1. CROSSTREK MODEL
1. Remove the screw, disconnect the connector and remove the paddle shift switch. (Model with paddle shift)
2. Release the claws and remove the screws, then detach the cover - spoke.
3. Remove connector and screw, and remove the cover - steering wheel LWR.
4. Release the claws and remove the screws, then detach the satellite switch.
5. Release the claws, and then remove the MID switch.
Dtc p0843 transmission fluid pressure sensor/switch "a" circuit high
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0843 TRANSMISSION FLUID PRESSURE SENSOR/SWITCH "A" CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTrouble symptom:Shift characteristics malfunctionCAUTION: ...
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearADJUSTMENT1. Measure the height “A” from the ST upper face to the ball bearing catch surface.ST 499575600GAUGE2. Measure the height “B” from the ST to the mating surface of the transmission case.ST 4995 ...
Caution
LUBRICATION(H4DO) > General DescriptionCAUTION• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary.2. Protect the vehicle using a seat cover, fender ...