Subaru Crosstrek Service Manual: Disassembly

CAUTION:

• Nut for fixing the rack is on the driver’s side only. When removing the tie-rod on the passenger’s side, turn over the boot - steering gearbox on the driver’s side, and fix the rack during operation.

• When fixing the steering gearbox assembly in a vise, apply a wooden piece on the flange portion.

1. Remove the tie-rod end (a) and lock nut (b) from the steering gearbox assembly.

2. Remove the clip - boot tie-rod (c) located outside the boot - steering gearbox using the pliers, and then slide the boot - steering gearbox to the tie-rod end side.

3. Remove the tie-rod (b) from the gearbox assembly.

(1) Using a flat tip screwdriver, remove the band - boot (a) from the boot - steering gearbox.

NOTE:

Replace the boot - steering gearbox or the band - boot (a) if there is damage, cracks or deterioration.

(2) Remove the tie-rod (b).

Assembly

Inspection

Other materials:

Operating the driver's window
Automatically open/close Open/close To open: Push the switch down lightly and hold it. The window will open as long as the switch is held. This switch also has a one-touch auto down function. To open the window fully, push the switch down until it clicks and then release it. T ...

Dtc p000b "b" camshaft position slow response bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P000B "B" CAMSHAFT POSITION SLOW RESPONSE BANK 1NOTE:For the diagnostic procedure, refer to DTC P0014. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0014 "B" CAMSHAFT P ...

Before using aha application
In order to use the aha application on this system, the application must be installed on the smartphone. Settings required to use aha application Search and download the aha application from your smartphone app store. iPhone and iPod touch: Apple App Store via iTunes Android device ...