INSTRUMENTATION/DRIVER INFO > Combination Meter
DISASSEMBLY
CAUTION:
• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
• Be careful not to apply excessive force to the trip knob.
• Be sure not to touch the meter indicator needle.
• Because LEDs are used for all of warning lights and indicator lights, they are not removable from the meter - main assembly.
1. Release the claws, and then remove the glass - combination meter.
2. Release the claws, and then remove the visor - combination meter.
Hazard warning flasher setting
1. Perform the preparation steps according
to "Preparation for car settings"
2. Operate the " " or "
" switch to
select the "Hazard Warning Flasher" item.Then push the button.
3. The current setting will be displayed.
Push the button to enter the
selection
mode.
4. Select "O ...
Removal
CONTROL SYSTEMS > MT Gear Shift LeverREMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.2. Remove the console box. Console Box > REMOVAL">3. Remove the gear shift knob and remove the ...
General diagnostic table Inspection
POWER ASSISTED SYSTEM (POWER STEERING) > General Diagnostic TableINSPECTIONTroublePossible causeCorrective action• Steering effort is heavy in all ranges.• Steering effort is heavy at stand still.• Steering wheel vibrates when turning.1. Tire and wheel• Improper tire out o ...