FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Intake Manifold
DISASSEMBLY
1. Remove the throttle body. Throttle Body > REMOVAL">
2. Remove the purge control solenoid valve. Purge Control Solenoid Valve > REMOVAL">
3. Remove the manifold absolute pressure sensor. Manifold Absolute Pressure Sensor > REMOVAL">
4. Remove the EGR pipe from intake manifold.
5. Remove the fuel delivery pipe from intake manifold.
NOTE:
Disconnect the quick connector as shown in the figure.
(a) | Slider |
6. Remove the fuel pipe and cap from the intake manifold.
List of diagnostic trouble code (dtc) List
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LIST(1) Keyless access systemDTCItemContent of diagnosisNoteU0073CONTROL MODULE COMMUNICATION BUS OFFDetected when CAN line abnormality is detected. Diagnostic Procedure with Diagnostic Trouble Code ...
Removal
GLASS/WINDOWS/MIRRORS > Front Door GlassREMOVAL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the sealing cover - front door. Front Sealing Cover & ...
Inspection
LIGHTING SYSTEM > SRF OFF SwitchINSPECTION1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard2 — 3OFF1 M? or moreONLess than 1 ?2. Apply battery voltage between the connector terminals to check lighting condition of illu ...