Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Disassembly

FRONT SUSPENSION > Front Arm

DISASSEMBLY

1. BUSHING FRONT - FRONT ARM

1. Put an alignment mark on the front arm assembly based on the split portion of the bushing intermediate plate of the busing front - front arm.

CAUTION:

Always put an alignment mark for aligning the position on bushing installation.

(a)

Put an alignment mark.

(b)

Split portion of bushing intermediate plate

(c)

Bushing intermediate plate

2. Using the ST and a press, remove the busing front - front arm.

PREPARATION TOOL:

ST: INSTALLER & REMOVER SET (927680000)

2. BUSHING REAR - FRONT ARM

1. Put an alignment mark on the front arm assembly based on the center of recess portion of the busing rear - front arm.

2. Using the ST and a press, remove the busing rear - front arm.

PREPARATION TOOL:

ST1: REMOVER (20299AG000)

ST2: BASE (20299AG010)

(a)

Press

(b)

Front arm ASSY

(c)

Bushing rear - front arm

Removal
FRONT SUSPENSION > Front ArmREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL">3. Remove the front arm assem ...

Installation
FRONT SUSPENSION > Front ArmINSTALLATION1. Before installation, inspect the following items and replace any faulty part with a new one.• Check the front arm assembly for damage or cracks, and ...

Other materials:

Control screen and audio panel
Select to display the audio source selection screen. Select to open the station list. Refer to "Station list" F5-51. Select to skip the current track. The track pauses when touched during playback and plays when touched during pause. Select to set thumbs up. This gives a h ...

Dtc u0422 invalid data received from body control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULEDTC DETECTING CONDITION:Defective data was transmitted from body integrated unit.TROUBLE SYMPTOM:Cooperation control with body integrated unit does not operate ...

Dtc u0402 invalid data received from tcm
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0402 INVALID DATA RECEIVED FROM TCMDTC detecting condition:Received error data from TCM.Trouble symptom:Sport indicator light blinks.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic ...

© 2016-2024 Copyright www.sucross.com