Subaru Crosstrek Service Manual: Disassembly
EXTERIOR/INTERIOR TRIM > Door Trim
DISASSEMBLY
1. Remove the door trim.
2. Remove the rivets and claws, and remove the weather strip - door INN from the door trim.
(a) | Rivet | (b) | Claw | (c) | Claw |
NOTE:
Remove the rivets by using the rivet cutter or nippers.
Removal
EXTERIOR/INTERIOR TRIM > Door TrimREMOVAL1. FRONT DOOR1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - front door.(1) Attach the protective tape (a).(2) Open t ...
Installation
EXTERIOR/INTERIOR TRIM > Door TrimINSTALLATIONInstall each part in the reverse order of removal.NOTE:Attach the door lock cable (a - end ball: small) to the upper side, and attach the door open cab ...
Other materials:
How to use SUBARU STARLINK
1. Connect to the audio system. Use a
USB port for an iPhone or iPod touch and
Bluetooth for Android devices.
For details about connecting an
iPhone/iPod touch: Refer to "Connecting
and disconnecting a USB memory/
portable device"
For details about registering or connecting
an Androi ...
Removal
EXTERIOR BODY PANELS > Front HoodREMOVAL1. FRONT HOOD PANELCAUTION:The hood COMPL - front is heavy. When removing or installing the hinge COMPL - front hood, be sure to work in a group of two or more.1. Open the hood COMPL - front.2. Remove the clips, and remove the insulator - front hood.3. Remo ...
Cleaning ventilation grille
Front ventilation inlet grille
Always keep the front ventilation inlet grille
free of snow, leaves, or other obstructions
to ensure efficient heating and defrosting.
Since the condenser is located in front of
the radiator, this area should be kept clean
because cooling performance i ...
