COOLING(H4DO) > Radiator Sub Fan and Fan Motor
DISASSEMBLY
1. Remove the clip which holds the sub fan motor connector onto the radiator sub fan shroud.
2. Disconnect the radiator sub fan from the sub fan motor.
3. Disconnect the sub fan motor from the radiator sub fan shroud.
Dtc b1576 egi control module eeprom
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1576 EGI CONTROL MODULE EEPROMDTC DETECTING CONDITION:• ECM malfunctioning• Failed to access ROM in ECM during key registration.CAUTION:When the ECM is replaced, registration of the immobilizer sys ...
Inspection
CLUTCH SYSTEM > Release Bearing and LeverINSPECTION1. RELEASE BEARINGCAUTION:Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.1. Check the bearing for smooth movement by applying force to the bearing in the ...
Dtc b1012 battery backup power supply
BODY CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1012 BATTERY BACKUP POWER SUPPLYDTC detecting condition:Voltage failure caused by poor contact of battery power supply backup circuitsTrouble symptom:Illuminations for the keyless entry, map light, lug ...