Subaru Crosstrek Service Manual: Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reverse Brake Assembly
DISASSEMBLY
1. Remove the snap ring.
2. Remove the retaining plate, drive plate, driven plate and dish plate.
3. Compress the return spring using the ST to remove the snap ring.
| ST 18762AA001 | COMPRESSOR SPECIAL TOOL |
4. Using the ST, remove the snap ring and spring retainer.
5. Remove the return spring.
6. Remove the reverse brake piston by blowing compressed air intermittently from reverse brake housing hole.
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reverse Brake AssemblyREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the a ...
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reverse Brake AssemblyINSPECTION• Inspect the drive plate facing for wear and damage.• Check the driven plate for discoloration (burnt color) ...
Other materials:
Preparation tool
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Selec ...
Preparation tool
LUBRICATION(H4DO) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS18332AA000OIL FILTER WRENCHUsed for removing and installing oil filter (black). (Outer diameter: 68 mm (2.68 in)) — SUBARU SELECT MONITOR 4Used for setting of each function and trouble ...
Removal
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorREMOVAL1. Remove the V-belt covers.2. Disconnect the ground cable from battery. NOTE">3. Remove the V-belts. V-belt > REMOVAL">4. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).5. Remove the ...
