CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch Assembly
DISASSEMBLY
1. FORWARD CLUTCH ASSEMBLY
1. Remove the snap ring.
2. Remove the retaining plate, drive plate, driven plate and dish plate.
3. Compress the return spring using the ST to remove the snap ring.
ST1 18762AA010 | COMPRESSOR SPECIAL TOOL |
ST2 398673600 | COMPRESSOR |
4. Remove the chamber COMPL and snap ring.
5. Remove the return spring.
6. Remove the forward clutch piston by blowing compressed air intermittently from the forward clutch carrier hole.
2. PLANETARY CARRIER ASSY
NOTE:
Disassemble the balance oil guide only.
1. Remove the snap ring.
2. Remove the balance oil guide.
3. INTERNAL GEAR
1. Remove the snap ring.
2. Remove the thrust gear plate.
Installation
EXTERIOR/INTERIOR TRIM > Side GarnishINSTALLATIONCAUTION:Do not reuse the garnish assembly. Deformation occurs on the garnish assembly when once removed, and this may cause improper adhesion.1. Install each part in the reverse order of removal.2. Install the garnish assembly - fender and the garn ...
Keyless access system check Operation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Keyless Access System CheckOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...
Preparation tool
WHEEL AND TIRE SYSTEM > General DescriptionPREPARATION TOOL1. GENERAL TOOLTOOL NAMEREMARKSAir pressure gaugeUsed for measuring tire air pressure.Dial gaugeUsed for measuring wheel runout.Wheel balancerUsed for adjusting wheel balance.Circuit testerUsed for measuring resistance, voltage and curren ...