Subaru Crosstrek Service Manual: Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter Case
DISASSEMBLY
1. Remove the pitching stopper bracket and transmission radio ground cord, if mounted.
2. Remove the filler plug, oil drain plug and overflow drain plug. Differential Gear Oil > REPLACEMENT">
3. Remove all plugs.
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter CaseREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the air breat ...
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter CaseINSPECTION• Check for leakage of CVTF from the connection between converter case and transmission case.• Check there is no dama ...
Other materials:
Assembly
CLUTCH SYSTEM > Master CylinderASSEMBLY1. Apply a coat of grease to the contact surfaces of the push rod and piston before installation.Grease:SILICONE GREASE G-40M or equivalent2. Assemble in the reverse order of disassembly.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb) ...
Dtc p0335 crankshaft position sensor "a" circuit
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0335 CRANKSHAFT POSITION SENSOR "A" CIRCUITDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine stall• Failure of engine to startCAUTION:After servicing or re ...
When checking or servicing in the engine compartment
CAUTION
Do not contact the drive belt
cover while checking the components
in the engine compartment.
Doing so may cause your
hand to slip off the cover and
result in an unexpected injury.
Do not touch the oil filter until the engine has cooled down
completely.
Doing so m ...
