Subaru Crosstrek Service Manual: Disassembly
CLUTCH SYSTEM > Clutch Pedal
DISASSEMBLY
1. Remove the clutch switches.
2. Remove the clip, assist spring, rod and bushing.
(A) | Clip |
(B) | Assist spring |
(C) | Assist rod |
(D) | Bushing |
(E) | Clevis pin |
3. Remove the spring pin and lever.
(A) | Spring pin |
(B) | Lever |
4. Remove the clutch pedal and pedal bushings.
(A) | Clutch pedal |
(B) | Pedal bushing |
5. Remove the stopper.
(A) | Stopper |
6. Remove the clutch pedal pad.
Assembly
CLUTCH SYSTEM > Clutch PedalASSEMBLY1. Install the stopper and pedal pad to the clutch pedal.2. Install the clutch switch to the pedal bracket.3. Clean the pedal bushing holes of the clutch pedal a ...
Inspection
CLUTCH SYSTEM > Clutch PedalINSPECTIONMove the clutch pedal pads in the lateral direction with a force of approximately 10 N (1 kgf, 2 lbf) to check that the clutch pedal deflection is within the s ...
Other materials:
Models without multi function display
NOTE
For models with information display
(black and white), refer to "Information
display"
The U.S.-spec models are not equipped
with the multi function display. The other
models may be equipped with the multi
function display or not, depending on the
model.
Safety precautions
WARNING
Alw ...
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reverse Brake AssemblyINSPECTION• Inspect the drive plate facing for wear and damage.• Check the driven plate for discoloration (burnt color).• Check for worn snap ring, fatigue or damaged return spring or deformed spring retainer.&bul ...
Preparation tool
POWER ASSISTED SYSTEM (POWER STEERING) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS34099PA100SPANNERUsed when measuring the rotational resistance of gearbox assembly. — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting ...
