Subaru Crosstrek Service Manual: Diagnostic procedure with phenomenon
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostics with Phenomenon
DIAGNOSTIC PROCEDURE WITH PHENOMENON
Phenomenon | Check item | Reference | |
1 | CRUISE switch is not turned ON. (CRUISE indicator does not illuminate.) Or the cruise control is cancelled without CRUISE switch operation. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
(2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
(3) Check the cruise control command switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
(4) Check the CRUISE indicator. | Diagnostics with Phenomenon > CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT"> | ||
2 | Cruise control cannot be set. Or the cruise control is cancelled without canceling operation. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
(2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
(3) Check the cruise control command switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
(4) Check stop light switch and brake switch. | Stop Light Switch"> | ||
(5) Check clutch switch. | Clutch Switch"> | ||
(6) Check the neutral position switch. | Diagnostic Procedure with Cancel Code > 14"> | ||
(7) Check vehicle speed sensor. | Diagnostic Procedure with Cancel Code > 22"> | ||
3 | SET indicator does not illuminate. | Check the SET indicator. | Diagnostics with Phenomenon > CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT"> |
4 | Vehicle speed is not held within set speed ±3 km/h (±2 MPH). | Check the vehicle speed sensor. | Diagnostic Procedure with Cancel Code > 22"> |
5 | Vehicle speed does not increase or does not return to set speed after RES/+ switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the RES/+ switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
6 | Vehicle speed does not decrease after SET/− switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the SET/− switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
7 | Cruise control is not released after CANCEL switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the CANCEL switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
8 | Cruise control is not released after brake pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check stop light switch and brake switch. | Diagnostic Procedure with Cancel Code > 12"> | ||
9 | Cruise control is not released after shifting to the neutral position. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the neutral position switch. | Diagnostic Procedure with Cancel Code > 14"> | ||
10 | Cruise control is not released after clutch pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check clutch switch. | Diagnostic Procedure with Cancel Code > 13"> | ||
Check cruise indicator light and cruise set indicator light
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostics with PhenomenonCHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHTTROUBLE SYMPTOM:Cruise control can be set, but the CRUISE indicator and S ...
Other materials:
Installation
EXTERIOR/INTERIOR TRIM > Rear BumperINSTALLATIONInstall each part in the reverse order of removal.CAUTION:Before installing the bumper face, match the claws on the bracket - rear bumper with the engaging position of flange section on the bumper face side. If the engaging position is not correct, ...
Operation
GLASS/WINDOWS/MIRRORS > Power Window SystemOPERATION1. RESET OPERATION A1. Sit in the driver’s seat and close the door.2. Turn the ignition switch to ON.3. Operate the switch - power window main to open the glass assembly - front door halfway.4. Operate the switch - power window main in &ld ...
Removal
LIGHTING SYSTEM > Ignition Switch IlluminationREMOVALNOTE:The ignition switch illumination is integrated into the immobilizer antenna assembly.1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - column.(1) Remove the screws by turning the steering wheel to r ...
