Subaru Crosstrek Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc c2552 motor relay
- Dtc u1120 lost communication with autostart stop control module
- Dtc u0122 lost communication with vehicle dynamics control module
- Dtc c2511 torque sensor main
- Dtc c2512 torque sensor sub
- Dtc c2513 torque sensor much tolerance
- Dtc c2514 torque sensor power supply
- Dtc c2521 motor malfunction
- Dtc c2522 resolver sensor
- Dtc c2531 control module cpu
- Dtc c2532 control module peripheral circuit
- Dtc c2533 control module board temperature sensor
- Dtc c2541 vehicle dynamics control module vehicle speed sensor
- Dtc c2543 error passive
- Dtc c2551 power supply relay
- Dtc u0416 invalid data received from vehicle dynamics control module
- Dtc u0073 control module communication bus off
Wiring diagram
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Control Module I/O SignalWIRING DIAGRAM(1)Battery(5)Engine control module (ECM)(9)Torque sensor (main & sub)(2)Ignition switch(6)Power ste ...
Dtc c2552 motor relay
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2552 MOTOR RELAYTROUBLE SYMPTOM:• The steering wheel operation feels heavy.& ...
Other materials:
65
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code65Cruise control command switch malfunction is detected.While the command switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.TROUBLE SYMPTOM:• Cruise control cannot be se ...
Dtc u1433 invalid data received from eyesight
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U1433 INVALID DATA RECEIVED FROM EyeSightNOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure">1. OUTLINE OF DIAGNOSIS• ...
Disarming the system
Perform either of the following procedures.
Briefly press the disarm button (for less
than 2 seconds) on the access key/remote
transmitter.
Carry the access key and perform
either of the following procedures (models
with "keyless access with push-button
start system").
Grip the front door ...
