ENGINE (DIAGNOSTICS)(H4DO) > Data Link Connector
NOTE
This connector is used for Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit may be damaged.
Terminal No. | Contents | Terminal No. | Contents |
1 | Blank | 9 | Blank |
2 | Blank | 10 | Blank |
3 | Blank | 11 | Blank |
4 | Ground | 12 | Blank |
5 | Ground | 13 | Blank |
6 | CAN communication (Hi) | 14 | CAN communication (Lo) |
7 | Subaru Select Monitor signal | 15 | Blank |
8 | IG | 16 | Power supply |
Removal
EXTERIOR/INTERIOR TRIM > Sun VisorREMOVAL1. Remove the sun visor assembly.(1) Remove the cap - sun visor, and then remove the screws.(2) Disconnect the connector and remove the sun visor assembly.2. Remove the hook - sun visor.(1) Press both sides using a flat tip screwdriver.(2) Remove the hook ...
Fuel injector circuit
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostics for Engine Starting FailureFUEL INJECTOR CIRCUITCAUTION:• Check or repair only faulty parts.• After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION">, and Inspection Mode Inspection Mode ...
Removal
FRONT SUSPENSION > Front ArmREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL">3. Remove the front arm assembly.(1) Remove the bolt, and then detach the front support. (Electric power steering model only)(2) ...