Replacement
AssemblyInspection
WIPER AND WASHER SYSTEMS > Wiper BladeINSPECTION1. Check and clean the rubber assembly - wiper.CAUTION:• Do not use organic solvent-based cleaner when cleaning rubber parts in order to avoid rubber part deterioration.• Clean rubber parts using a soft cloth or paper towel dampened with ...
Installation
DRIVE SHAFT SYSTEM > Rear AxleINSTALLATION1. Temporarily tighten the rear axle housing to the upper arm assembly.2. Install the rear drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the h ...
Inspection
ENTERTAINMENT > Data Communication ModuleINSPECTION1. BACKUP BATTERY1. Measure the voltage between connector terminals.Preparation tool:Circuit testerTerminal No.Standard1 (+) — 2 (−)2 V or more2. Replace the backup battery if the inspection result is not within the standard value. ...