Subaru Crosstrek Service Manual: Crankshaft position sensor plate

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Crankshaft Position SensorINSTALLATIONInstall in the reverse order of removal.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb) ...

Inspection

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Crankshaft Position Sensor PlateINSPECTIONCheck that the crankshaft position sensor plate has no deformation, cracks or other damages. ...

Other materials:

Brake fluid
Checking the fluid level WARNING Never let brake fluid contact your eyes because brake fluid can be harmful to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety, when performing this work, wearing eye protection is advisabl ...

Inspection
LUBRICATION(H4DO) > Oil Pressure SystemINSPECTIONSTEPCHECKYESNO1.CHECK ENGINE OIL AMOUNT.Is the engine oil amount normal? Engine Oil > INSPECTION"> Oil Pressure System > INSPECTION">Go to Step 2.Adjust the engine oil amount. Engine Oil > INSPECTION"> After the o ...

Canceling the function for meter/gauge needle movement upon turning on the ignition switch
It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the "ON" position. Type A combination meter To change the setting, perform the following procedure. 1. Turn the ignition switch to the "LOCK"/ ...