Refer to "Setting Bluetooth details"
Press to turn the audio system on/off.
Press to select an audio source. Refer to "Selecting an audio source"
Press and hold to fast forward/rewind.
NOTE
Depending on the Bluetooth device that is connected to the system, the music may start playing when selecting the key while it is paused. Conversely, the music may pause when selecting the key while it is playing.
In the following conditions, the system may not function:
It may take time to connect the phone when Bluetooth audio is being played.
For operating the portable player, see the instruction manual that comes with it.
If the Bluetooth device is disconnected due to poor reception from the Bluetooth network when the ignition switch is in the "ACC" or "ON" position, the system will automatically reconnect to the portable player.
If the Bluetooth device is disconnected on purpose, such as it was turned off, this does not happen.
Reconnect the portable player manually.
Bluetooth device information is registered when the Bluetooth device is connected to the Bluetooth audio system.
When selling or disposing of the vehicle, remove the Bluetooth audio information from the system. Refer to "Bluetoothsettings"
Contrast setting
1. Perform the preparation steps according
to "Preparation for image quality and
volume settings"
2. Operate the "
" or ""
switch to
select the "Contrast" item. Then push the
button.
3. Select a contrast level by operating the
"
"
or "
" switch, and confirm the setting
b ...
Electrical component location Location
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Combination meter(2)MFD(3)Data link connector ...
Select lever
Select lever positions
Select lever button
With the brake pedal depressed,
shift
while pressing the select lever button in.
Shift while pressing the select
lever
button in.
Shift without pressing the
select lever
button.
The select lever has four positions, "P",
"R", "N", ...