Subaru Crosstrek Owners Manual: Control screen and audio panel
Control screen
- Perform the SXM setting. See below.
Refer to "SXM setting" F5-42.
- Search for a channel which the direction of higher frequency from current frequency. Reproduce the channel that can receive by 5 seconds.
- A list is displayed. There are three types of lists ("Presets", "Categories" or "All Channels") available.
- Presets": Preset channels are displayed in a list.
- "Categories": The channels of the selected category are displayed in a list.
- "All Channels": All selectable channels are displayed in a list.
- Display the contents information of a channel receiving.
- Presets list (30 channels max.) is displayed. Refer to "Presetting a channel" F5-40.
- Categories list is displayed. Refer to "Selecting a channel from the list" F5-41.
- All channels list is displayed.
The available received channels are displayed, and you can select a channel
- Change to the Direct Tune display.
Refer to "Direct Tune" F5-42.
- Return to the previous display.
- Return to the playback display.
Audio panel
- Turn to adjust volume.
Press to turn the audio system on/ off.
- Press to display the sound setting screen. Refer to "Unit settings" F5- 19.
- Turn right to step up channels and
turn left to step down channels.
Press to select an audio source.
Refer to "Selecting an audio source" F5-18.
- Press to step up/down channels.
Press and hold to step up/down channels fast.
SiriusXM Data Service
Data service information, which is comprised
of traffic information and weather
information, can be received via the
SiriusXM Radio.
To receive the data service information in
the vehicle, a su ...
How to subscribe to SiriusXM Satellite
Radio
To listen to a satellite radio broadcast in
the vehicle, a subscription to the SiriusXM
Satellite Radio service is necessary.
A SiriusXM Satellite Radio is a tuner
designed exclusively to receiv ...
Other materials:
Inspection
SEAT BELT SYSTEM > Rear Seat BeltINSPECTION1. VISUAL INSPECTIONCheck for the following, and replace with new parts if necessary.• Seat belt is slackened, bent or worn.• Seat belt is abnormally wound or extended.• Seat belt inner - rear is deformed or damaged.• Seat belt bu ...
Inspection
BRAKE > Brake BoosterINSPECTION1. OPERATION CHECK WHEN NOT USING MEASURING DEVICESCAUTION:When checking operation, be sure to apply the parking brake securely.When an operation check is performed with no measuring devices, a faulty part cannot be identified correctly. But it is possible to identi ...
Installation
MECHANICAL(H4DO) > Crank PulleyINSTALLATION1. Degrease the press-fit section for the chain cover front oil seal, and install the front oil seal to the chain cover using ST.CAUTION:Do not apply fluid such as engine oil to the front oil seal and the chain cover; otherwise engine oil leakage may occ ...
