Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Control panel

Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CondenserINSTALLATIONCAUTION:• If the condenser assembly - air conditioner has been replaced, add an appropriate amount of compressor oil. Compress ...

Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Control PanelINSPECTION1. CHECK ILLUMINATION1. Check the illumination operation when battery voltage is applied between the terminals of control panel.&bu ...

Other materials:

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Power Transistor (Auto A/C Model)REMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the glove box. Glove Box > REMOVAL">3. Remove the screws and remove the duct - foot RH.NOTE:Remove the connector and harness clip of ...

Inspection
ENTERTAINMENT > Switches and HarnessINSPECTION1. SATELLITE SWITCH ASSEMBLY1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 2VOL (+)VOL (−)SEEK (›)SEEK (‹)LISTRETURNA circuit is all OFF.Approx. 1 ...

Select lever
Select lever positions Select lever button With the brake pedal depressed, shift while pressing the select lever button in. Shift while pressing the select lever button in. Shift without pressing the select lever button. The select lever has four positions, "P", "R", "N", ...

© 2016-2024 Copyright www.sucross.com