INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Control Module I/O Signal
ELECTRICAL SPECIFICATION
• Combination meter
Terminal No. | Content | Terminal No. | Content |
1 | Security indicator | 27 | Ambient sensor |
2 | Charge warning light | 28 | UART (MFD) |
3 | Oil pressure warning light | 29 | Steering switch (+) |
4 | RH turn indicator | 30 | Pedestrian alert device |
6 | LH turn indicator | 32 | CAN communication line (−) |
8 | Auto headlight beam leveler warning light | 33 | CAN communication line (+) |
15 | Driver’s seat belt switch | 36 | Ambient sensor GND |
16 | Passenger’s seat belt switch | 37 | Fuel level sensor GND |
20 | Ignition power supply | 38 | GND |
21 | Washer fluid level sensor | 39 | Backup ignition power supply |
23 | Brake fluid level switch | 40 | Battery power supply |
25 | Fuel level sensor | — | — |
Terminal No. | Item | Measuring condition | Standard |
1 ←> Chassis ground | Voltage | Security indicator light off > on | 0 V > 10 — 14 V |
2 ←> Chassis ground | Voltage | Charge warning light off > on | 0 V > 10 — 14 V |
3 ←> Chassis ground | Voltage | Oil pressure warning light off > on | 0 V > 10 — 14 V |
4 ←> Chassis ground | Voltage | RH turn indicator off > on | 0 V > 10 — 14 V |
6 ←> Chassis ground | Voltage | LH turn indicator off > on | 0 V > 10 — 14 V |
8 ←> Chassis ground | Voltage | Auto headlight beam leveler warning light off > on | 0 V > 10 — 14 V |
15 ←> Chassis ground | Resistance | Driver’s seat belt switch ON | Less than 1 ? |
16 ←> Chassis ground | Resistance | Passenger’s seat belt switch ON | Less than 1 ? |
20 ←> Chassis ground | Voltage | IG OFF > ON | 0 V > 10 — 14 V |
21 ←> Chassis ground | — | Washer fluid level sensor | — |
23 ←> Chassis ground | — | Brake fluid level switch | — |
25 ←> 37 | Resistance | Fuel level sensor | 10 — 600 ? |
27 ←> 36 | Resistance | Ambient sensor | 1 — 35 k? |
28 (UART) ←> Chassis ground | — | Cannot be measured | — |
32 (CAN−) ←> Chassis ground | — | Cannot be measured | — |
33 (CAN+) ←> Chassis ground | — | Cannot be measured | — |
34 ←> Chassis ground | Resistance | Always | Less than 1 ? |
35 ←> Chassis ground | Resistance | Always | Less than 1 ? |
36 ←> Chassis ground | Resistance | Always | Less than 1 ? |
37 ←> Chassis ground | Resistance | Always | Less than 1 ? |
38 ←> Chassis ground | Resistance | Always | Less than 1 ? |
39 ←> Chassis ground | Resistance | Always | Less than 1 ? |
40 ←> Chassis ground | Voltage | Always | 10 — 14 V |
• MFD
Terminal No. | Content | Terminal No. | Content |
1 | Battery power supply | 7 | — |
2 | GND | 8 | — |
3 | Ignition power supply | 9 | UART (meter) |
4 | Switch communication line (−) | 10 | Passenger’s airbag ON |
5 | CAN communication line (−) | 11 | Passenger’s airbag OFF |
6 | CAN communication line (+) | 12 | Switch communication line (+) |
Terminal No. | Item | Measuring condition | Standard |
1 (+B) ←> Chassis ground | Voltage | Always | 10 — 14 V |
2 (GND) ←> Chassis ground | Resistance | Always | Less than 1 ? |
3 (IGN) ←> Chassis ground | Voltage | IG OFF > ON | 0 V > 10 — 14 V |
4 (STR−) ←> Chassis ground | — | Cannot be measured (switch communication line) | — |
5 (CAN−) ←> Chassis ground | — | Cannot be measured (CAN communication line) | — |
6 (CAN+) ←> Chassis ground | — | Cannot be measured (CAN communication line) | — |
9 (UART) ←> Chassis ground | — | Cannot be measured (meter communication line) | — |
10 ←> Chassis ground | Voltage | Passenger’s airbag ON indicator (when illuminating) | Less than 1 V |
11 ←> Chassis ground | Voltage | Passenger’s airbag OFF indicator (when illuminating) | Less than 1 V |
12 (STR+) ←> Chassis ground | — | Cannot be measured (switch communication line) | — |
Disassembly
WIPER AND WASHER SYSTEMS > Wiper BladeDISASSEMBLY1. FRONTPull the side (a) of the wiper rubber stopper, and remove the rubber assembly - windshield wiper from the blade assembly - windshield wiper.2. REARSlightly pull the top of the rubber assembly - rear wiper from the stopper (a), and pull out ...
Read diagnostic trouble code (dtc) Operation
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATIONRead out DTCs stored in the airbag system and the occupant detection system.1. AIRBAG SYSTEM1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information ...
Dtc c0022 front right abs sensor signal
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0022 FRONT RIGHT ABS SENSOR SIGNALNOTE:For the diagnostic procedure, refer to “DTC C0028 REAR LEFT ABS SENSOR SIGNAL”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) &g ...