If you connect a smartphone to this system after starting a supported aha application on the smartphone, you can display and operate the aha application displayed on the smartphone on the system screen.
1. Run the aha application on your smartphone.
2. Connect the iPhone/iPod touch to the USB port or connect the Android device by utilizing the Bluetooth connection (SPP and A2DP profile).
For details about connecting an iPhone/iPod touch: Refer to "Connecting and disconnecting a USB memory/ portable device" F5-17.
For details about registering or con-necting an Android device: Refer to "Registering/connecting Bluetooth device" F5-65.
NOTE
When iPhone/iPod touch and Android devices are connected at the same time, iPhone/iPod touch is prioritized.
How to change the source
Select the "aha" key on the source select screen. Refer to "Basic operation" F5-18.
Select the "aha" key on the APPS screen. Refer to "SUBARU STARLINK" F5-26.
NOTE
When starting-up "aha", there are some smartphone models for which "aha" application does not start up automatically.
Control screen and audio panel
Select to display the audio source
selection screen.
Select to open the station list. Refer to
"Station list" F5-51.
Select to skip the current track.
The track pauses when touched during
playback and plays when touched
during pause.
Select to set thumbs up.
This gives a h ...
Dtc b1500 fuel sender open/short-circuit detection
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1500 FUEL SENDER OPEN/SHORT-CIRCUIT DETECTIONDTC detecting condition:The fuel gauge circuit is open or shorted.Trouble symptom:• Defective fuel gauge.• Fuel level warning light blin ...
Note
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) SystemNOTEFor procedure of each component in the Multi-Function Display (MFD) system, refer to the respective section.• Multi-function display: Multi-function Display (MFD) > REMOVAL">• Multi-function display switc ...