Subaru Crosstrek Owners Manual: Connecting a Bluetooth device
To use the Bluetooth audio system, it is necessary to register a Bluetooth device with the system.
Registering an additional device
1. Select the "Add" key on the Bluetooth devices connection screen.
2. For more information: Refer to "Registering/ connecting Bluetoothdevice" F5- 65.
- Selecting a registered device
1. Select the "Select" key on the Bluetooth devices connection screen.
2. For more information: Refer to "BT Devices Connection screen"
How to change the source
Select the "BT Audio" key on the source select screen. Refer to "Selecting an audio source"
NOTE
Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual.
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Select to display as a list (for the
models with ...
Select play mode
The play mode settings display will appear
when play mode key is touched. Select
the preferred play mode from the following
items.
Icon
Function
Touch to start 1 track repea ...
Other materials:
Hill start assist warning light/Hill start assist OFF indicator light
Hill
start assist warning light
While the engine is running, if there are
any malfunctions in the Hill start assist
system, the warning light will illuminate.
WARNING
When the Hill start assist warning
light illuminates, have the vehicle
inspected at an authorized SUBARU
dealer.
Hill st ...
Caution
ENGINE (DIAGNOSTICS)(H4DO) > General DescriptionCAUTION1. Airbag system wiring harness is routed near the ECM, main relay and fuel pump relay.CAUTION:• Do not use electrical test equipment on the airbag system circuits.• Be careful not to damage the airbag system wiring harness when s ...
Preparation for image quality and volume settings
1. Turn the ignition switch to the "ON"
position.
2. Push and hold the button to show
the selection screen.
3. After the selection screen is displayed,
operate the "
" or "
" switch to show the
"Display" item. Then, push the
button. ...
