Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Component

SEAT BELT SYSTEM > General Description

COMPONENT

1. FRONT SEAT BELT

(1)

Adjuster ASSY - seat belt

(4)

Seat belt inner - front

Tightening torque: N·m (kgf-m, ft-lb)

(2)

Cover through

(5)

Wave washer

T1:

7.5 (0.76, 5.5)

(3)

Seat belt outer - front (only on passenger’s side with lap seat belt pretensioner)

(6)

Seat belt outer - front

T2:

30 (3.06, 22.1)

T3:

38 (3.87, 28.0)

T4:

53 (5.4, 39.1)

2. REAR SEAT BELT

(1)

Seat belt outer - rear RH

(4)

Seat belt outer - rear LH

Tightening torque: N·m (kgf-m, ft-lb)

(2)

Seat belt - CTR RH

(5)

Seat belt - rear shoulder CTR

T1:

30 (3.06, 22.1)

(3)

Seat belt - CTR LH

T2:

53 (5.4, 39.1)

Preparation tool
SEAT BELT SYSTEM > General DescriptionPREPARATION TOOL1. SPECIAL TOOL• SUBARU SELECT MONITORILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each funct ...

Rear seat belt
...

Other materials:

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyINSTALLATION1. Install the thrust bearing to the converter case.NOTE:Face the temper color surface to the converter case side.2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the ...

Removal
ENTERTAINMENT > Switches and HarnessREMOVAL1. SATELLITE SWITCH ASSEMBLYCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Set the tire to the straig ...

Subaru select monitor Operation
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. GENERAL DESCRIPTIONThe on-board diagnosis function of the cruise control system uses Subaru Select Monitor.The on-board diagnosis function operates in two categories, which are used depending on the type of problems;1. Cruise ...

© 2016-2024 Copyright www.sucross.com