LUBRICATION(H4DO) > General Description
COMPONENT
1. OIL PAN AND STRAINER
(1) | Oil pan upper | (8) | Drain plug gasket | Tightening torque: N·m (kgf-m, ft-lb) | |
(2) | O-ring | (9) | Drain plug | T1: | 5 (0.5, 3.7) |
(3) | Baffle plate | (10) | Oil level switch | T2: | 6.4 (0.7, 4.7) |
(4) | O-ring | (11) | O-ring | T3: | 10 (1.0, 7.4) |
(5) | Oil strainer | (12) | Plug | T4: | 41.7 (4.3, 30.8) |
(6) | Oil pan | (13) | Clutch housing cover (MT model) | T5: | 90 (9.2, 66.4) |
(7) | Oil pan seal ring | T6: | Oil Pan > INSTALLATION"> | ||
T7: | Oil Pan > INSTALLATION"> |
2. OIL FILTER AND OIL LEVEL GAUGE
(1) | Oil filter | (8) | Oil level gauge guide | Tightening torque: N·m (kgf-m, ft-lb) | |
(2) | Oil pump union | (9) | Oil pressure switch | T1: | 1.5 (0.2, 1.1) |
(3) | Generator cord stay | (10) | Engine oil temperature sensor | T2: | 6.4 (0.7, 4.7) |
(4) | Oil filler cap | (11) | O-ring | T3: | 8 (0.8, 5.9) |
(5) | Chain cover | (12) | Gasket | T4: | 18 (1.8, 13.3) |
(6) | Oil level gauge | (13) | Gasket | T5: | 45 (4.6, 33.2) |
(7) | O-ring |
Screen Settings
After entering the "Screen Settings" menu,
select one of the following menus.
Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
"On" to activate the screens. Select "Off"
to deactivate the screens.
Gauge Initial Movement
The movement of the m ...
Installation
ENTERTAINMENT > AudioINSTALLATIONCAUTION:• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.• Before handling the airbag system components, refer to “CAUTION” of “Ge ...
Fuel octane rating
Using a gasoline with a lower octane
rating can cause persistent and heavy
knocking, which can damage the engine.
Do not be concerned if your vehicle
sometimes knocks lightly when you drive
up a hill or when you accelerate. Contact
your SUBARU dealer if you use a fuel with
the specified oct ...