INTAKE (INDUCTION)(H4DO) > General Description
COMPONENT
(1) | Air intake duct | (8) | Air cleaner case (rear) | Tightening torque: N·m (kgf-m, ft-lb) | |
(2) | Clip | (9) | Clip | T1: | 1 (0.1, 0.7) |
(3) | Cushion | (10) | Mass air flow and intake air temperature sensor | T2: | 3 (0.3, 2.2) |
(4) | Air cleaner case (front) | (11) | Clamp | T3: | 6 (0.6, 4.4) |
(5) | Spacer | (12) | Clamp | T4: | 7.5 (0.8, 5.5) |
(6) | Cushion | (13) | Clip | ||
(7) | Air cleaner element | (14) | Air intake boot |
Front seatbelts
1. Adjust the seat position according to
the following procedure.
Driver's seat: Adjust the seatback to the
upright position. Move the seat as far from
the steering wheel as practical while still
maintaining full vehicle control.
Front passenger's seat: Adjust the seatback
to the upright ...
Dtc c0034 fl pressure reducing valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0034 FL PRESSURE REDUCING VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble C ...
Disassembly
CONTROL SYSTEMS > MT Gear Shift LeverDISASSEMBLY1. Remove the lock wires.(A)Lock wire2. Remove the rod from gear shift lever.(A)Rod(B)Lever(C)Stay3. Separate the rod and inner boot.4. Remove the snap ring from the stay.(A)Snap ring5. Separate the gear shift lever and the stay.6. Remove the boot a ...