FRONT SUSPENSION > General Description
COMPONENT
1. FRONT SUSPENSION
(1) | Front crossmember COMPL | (14) | Bushing rear - front arm | (27) | Clip |
(2) | Flange bolt | (15) | Stud bolt | ||
(3) | Front crossmember support | (16) | Stopper - front arm bushing rear | Tightening torque: N·m (kgf-m, ft-lb) | |
(4) | Front stabilizer | (17) | Adapter | T1: | 25 (2.55, 18.4) |
(5) | Bushing - stabilizer | (18) | Front arm rear plate | T2: | 60 (6.12, 44.3) |
(6) | Clamp - stabilizer bushing | (19) | Adjusting washer | T3: | 39 (3.98, 28.8) |
(7) | Flange nut | (20) | Ball joint ASSY | T4: | 50 (5.10, 36.9) |
(8) | Stabilizer link | (21) | Castle nut | T5: | 60 (6.12, 44.3) |
(9) | Self-locking nut | (22) | Cotter pin | T6: | 95 (9.69, 70.1) |
(10) | Front support | (23) | Housing ASSY - front axle | T7: | 100 (10.20, 73.8) |
(11) | Support plate - front crossmember | (24) | Flange bolt | T8: | 110 (11.22, 81.1) |
(12) | Bushing front - front arm | (25) | Adjusting bolt | T9: | 150 (15.30, 110.6) |
(13) | Front arm ASSY | (26) | Front strut ASSY | T10: | 155 (15.81, 114.3) |
2. FRONT STRUT
(1) | Dust seal - front strut | (7) | Rubber seat | Tightening torque: N·m (kgf-m, ft-lb) | |
(2) | Self-locking nut | (8) | Dust cover - front strut | T1: | 20 (2.04, 14.8) |
(3) | Flange nut | (9) | Helper - front strut | T2: | 55 (5.61, 40.6) |
(4) | Strut mount - front | (10) | Dust cover inner | ||
(5) | Spacer - front strut | (11) | Coil spring - front | ||
(6) | Spring seat - front strut UPR | (12) | Strut COMPL - front |
Caution
GLASS/WINDOWS/MIRRORS > General DescriptionCAUTION• Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting t ...
Inspection
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > General DescriptionINSPECTIONBefore performing the diagnosis, check the following items which may cause problems relating the wiper or light.1. Check the battery. Battery">2. Check the fuse condition.3. Check the connecting condition of harness ...
Roof antenna (for Rod type)
CAUTION
Be sure to remove the antenna
rod before entering garages,
parking towers and other locations
with low ceilings.
Remove the antenna rod before
washing your car at a car wash. If
the antenna rod is left attached, it
may scratch the roof.
When reinstalling the removed
ant ...