General diagnostic table InspectionRemoval
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Camshaft Position SensorREMOVAL1. INTAKE SIDE1. Disconnect the ground cable from battery.2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL">3. Disconnect the connector (A) from the camshaft position sensor, and remove the cam ...
Refrigerant leak check Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Leak CheckINSPECTION1. Attach the manifold gauge set.Preparation tool:Manifold gauge set(1) Check that all valves are fully closed.(2) Install the low/high pressure hoses to the service ports on the low/high pressure sides of the vehicle resp ...
Note
INSTRUMENTATION/DRIVER INFO > Combination Meter SystemNOTEFor procedure of each component in the combination meter system, refer to the respective section.• Combination meter assembly: Combination Meter">• Speedometer: Speedometer">• Tachometer: Tachometer&quo ...