Subaru Crosstrek Service Manual: Check list for interview Check

Subaru Crosstrek Service Manual / Keyless access with push button start system (diagnostics) / Check list for interview Check

KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Check List for Interview

CHECK

Inspect the following items regarding the vehicle’s state.

Keyless Access with Push Button Start System Trouble Check List for Interview Received Year Month Date
Customer’s name		Registration No.	Initial year of registration Year Month Date
		Vehicle model	Frame number
Interviewer	Inspector	Engine type	Odometer reading
Customer specified content
Date and time when the trouble occurred		Frequency of trouble occurrence
Condition of trouble occurrence		Weather
Road conditions		Occurrence location
Accessory installation condition
Trouble condition
Diagnostic code			( )
Immobilizer system	Engine does not start		Starter does not operate Starter operates but engine does not start Engine starts but stops immediately
	Does not start with remote engine starter
Steering lock system	The steering lock is not released
	The steering lock does not lock
Keyless access system	Can not lock/unlock using the touch sensor (lock), touch sensor (unlock), trunk opener button or rear gate opener button and rear lock button
	Cannot lock with the touch sensor (lock) Cannot unlock with the touch sensor (unlock) Cannot lock nor unlock with the touch sensor (lock), touch sensor (unlock) Trunk does not open with the trunk opener button. Rear gate can not be locked with the rear lock button		Driver’s side door Passenger’s side door Rear gate door
	Cannot unlock with the rear gate opener button
	The access key lockout prevention feature does not function		Passenger room Luggage room
	The LED does not illuminate when the access key button is pressed
	The external buzzer does not beep
	The passenger room buzzer does not sound
Other	The room light or map light does not illuminate ( )

NOTE:

• Perform the diagnostics according to the basic diagnostic procedure.

• If the room light or map light does not illuminate and the keyless access does not function at the same time, the back-up fuse may be loose or blown.

Basic diagnostic procedure Procedure

KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Subaru Select Monitor kit is required for reading DTC, performing diagnosis and readi ...

Clear memory mode Operation

KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle in ...

Other materials:

Dtc c1342 rl pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1342 RL PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C ...

Control screen and audio panel
Select to display the audio source selection screen. Select to change the band. The HD Radio indicator on the top right of the screen changes according to the reception condition of HD Radio (if equipped). Select to display a station list (if equipped). Refer to "Selecting a ...

Turn signal lever
To activate the right turn signal, push the turn signal lever up. To activate the left turn signal, push the turn signal lever down. When the turn is finished, the lever will return automatically. If the lever does not return after cornering, return the lever to the neutral position by han ...