Subaru Crosstrek Service Manual: Check list for interview Check
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Check List for Interview
CHECK
• Inspect the following items regarding the vehicle’s state.
• Print out this page for interviewing customers.
Combination Meter / MFD Check List for Interview Date the Vehicle is Received Year Month Day | |||
Customer’s name | Registration No.
| Initial year of registration Year Month Date | |
Vehicle model
| Frame number
| ||
Interviewer
| Inspector
| Engine type
| Odometer reading
|
Customer specified content • • • | |||
Date and time when the trouble occurred |
| Frequency of trouble occurrence | Always occurs Sometimes occurs ( times per day, times per month) |
Condition of trouble occurrence (How the trouble occurs) |
| Weather | Fine • Cloudy • Rainy • Snowy • Others ( ) |
Temperature | °C (°F) — °C (°F) | ||
Road conditions |
| Occurrence location | |
Accessory installation condition | |||
Confirmation of trouble condition | |||
| |||
| |||
| |||
Combination meter
Basic diagnostic procedure Procedure
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURE1. COMBINATION METERSTEPCHECKYESNO1.PERFORM CUSTOMER INTERVIEW.Using the Check List for Interview, ask the customer th ...
Clear memory mode Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Clear Memory ModeOPERATION1. COMBINATION METER1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle ...
Other materials:
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission CaseDISASSEMBLY1. Remove the oil stopper plate.2. Remove all plugs from the transmission case.3. Remove the oil seal using a screwdriver wrapped with cloth etc.4. Using the ST, remove the ball bearing of the secondary pulley.(1) Remove the ...
Inspection
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > EGR Control ValveINSPECTION1. Check that the EGR control valve has no deformation, cracks or other damages.2. Measure the resistance between EGR control valve terminals.Terminal No.Standard2 and 122±2 ?2 and 322±2 ?5 and 422±2 ?5 and 622 ...
Operation
TELEMATICS SYSTEM (DIAGNOSTICS) > System Operation Check ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» displa ...
