Subaru Crosstrek Service Manual: Check list for interview Check

Subaru Crosstrek Service Manual / Continuously variable transmission (diagnostics) / Check list for interview Check

CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Check List for Interview

CHECK

Check the following items when a problem has occurred.

NOTE:

Use copies of this page for interviewing customers.

Customer’s name
Date of purchase
Date of repair
Transmission model	Transmission		V.I.N.
Odometer reading	km (miles)
Frequency	Continuous Intermittent ( times/day)
Weather	Fine Cloudy Rainy Snowy Other ( )
Place	Highland Suburbs Inner city Uphill Downhill Rough road Other ( )
Ambient air temperature	Hot Warm Cool Cold
Vehicle speed	km/h (MPH)
AT OIL TEMP light	Blinks continuously		Does not blink
Select lever position	P R N D Manual mode L range
Driving condition	Not affected At racing While decelerating	At starting While accelerating While turning ( RH/ LH)		While idling When cruising (Vehicle speed km/h) Immediately after starting the engine
Manual mode	ON OFF
Symptoms	Vehicle does not move ( Any position Particular position)
	Vehicle does not move (no load racing condition as in N range)
	Vehicle does not move (engine speed does not increase, felt as stall condition)
	Noise or vibration (Describe concretely: )
	Shock felt at N > D selection ( seconds after shifting, when engine cold or after warm-up)
	Shock felt at N > R selection ( seconds after shifting, when engine cold or after warm-up)
	Shifting is wrong (Describe concretely: )
	Shock or judder during driving
	Fails to accelerate.
	Engine speed increases abruptly during driving
	Shock or judder during standing start
	Select lever does not move
	Other ( )

Basic diagnostic procedure Procedure

CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.CHECK PRE-INSPECTION.1) Ask the customer when and how the trouble occurred using the interview ...

Clear memory mode Operation

CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and sel ...

Other materials:

Adjustment
CLUTCH SYSTEM > Clutch SwitchADJUSTMENT1. Loosen the lock nut of the clutch start switch.(A)Lock nut(B)Clutch start switch2. Disconnect the harness connector of the clutch start switch.3. Remove the snap pin and clevis pin connecting the clutch pedal and operating rod.(A)Clevis pin(B)Snap pin(C)P ...

Removal
GLASS/WINDOWS/MIRRORS > Windshield GlassREMOVAL1. USING WINDSHIELD GLASS KNIFECAUTION:• For model with EyeSight, always remove the glass - front window after the stereo camera is removed.• For model with EyeSight, always use Subaru genuine windshield glass specially designed for EyeSi ...

Removal
REAR SUSPENSION > Rear Sub FrameREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and then remove the rear wheels.3. Remove the bolts and clips, and remove the under cover - front.(1)Under cover - front(2)Mud guard - front(3)Spacer - under cover4. Remove t ...