CRUISE CONTROL SYSTEM (DIAGNOSTICS) > General Description
CAUTION
Airbag system wiring harness is routed near the cruise control command switch.
CAUTION:
• Do not use the electrical test equipment on the airbag system wiring harnesses and connector circuits.
• Be careful not to damage the airbag system wiring harness when servicing the cruise control command switch. Airbag system wiring harness is routed near the cruise control command switch.
Installation
LUBRICATION(H4DO) > Oil Pressure SwitchINSTALLATION1. Apply liquid gasket to the oil pressure switch threads.Liquid gasket:THREE BOND 1324 (Part No. 004403042) or equivalent2. Install the oil pressure switch to the chain cover.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)3. Connect the ...
Removal
CONTROL SYSTEMS > Select CableREMOVAL1. Shift the select lever to “N” range.2. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.3. Lift up the vehicle.4. Remove the center exhaust pipe. Cen ...
Removal
LIGHTING SYSTEM > License Plate LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the license plate light.(1) Release the claws and pull out the license plate light.(2) Disconnect the connector and remove the bulb socket and bulb from the license plate light.CAUTIO ...