Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: By contacts list

On the phone (menu) screen, select the "Contacts" key to open the phone number list screen.

You can make a call by selecting an item in the list (up to five phone numbers are listed).

If there is no contact data, a message is displayed to indicate that there is no contact data.

Contacts screen
Contacts screen

  1. Open the "Incoming Calls" screen.
  2. Open the "Outgoing Calls" screen.
  3. Open a pop-up screen for starting the download of contact data. Refer to "Update contacts from phone"
  4. Delete all contact data. The "Delete All" key is disabled when there is no contact data. Refer to "Deleting the contact data"
  5. Open a list of contacts that starts with the selected character. This key is cross-hatched and cannot be selected if there is no contact data that starts with the selected character.

Select the up/down arrow key to scroll the list of contacts.

When you select a phone number on the screen, the outgoing call screen opens.

NOTE

Up to 1000 items in the contact data are listed. Scroll the screen to see items that are not on the screen.

When the contact is empty

For PBAP incompatible but OPP compatible Bluetooth phones

On the "Contacts" screen, select the "Download Contacts" key. A screen where you can select how to download contacts opens.

You can select to download all items or download one item. For details, refer to "Update contacts from phone"

Delete contacts

When the "Delete All" key is selected, all contact data downloaded into the invehicle equipment will be deleted.

Refer to "Deleting the contact data"

By outgoing calls
On the phone (menu) screen, select the "Outgoing Calls" key to open the "Outgoing Calls" screen. You can make a call by selecting an item in the outgoing call history list. If there is no outgo ...

By Dialpad
Input the phone number manually using the keypad displayed on the screen. Phone (Dialpad) screen Allow you to enter numbers from 0 to 9 and *, #, and +. To enter "+", press and hold the ...

Other materials:

Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > FRESH/RECIRC Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the FRESH/RECIRC switch to check that the link operates normally.3. If it does not operate normally as t ...

Inspection
WIPER AND WASHER SYSTEMS > Washer Tank and MotorINSPECTION1. WASHER PUMPApply battery voltage to the connector terminal of the motor pump assembly - washer, and make sure that the motor operates.2. WASHER FLUID LEVEL SENSOR1. Check the connection status of washer fluid level sensor connector.2. D ...

Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyASSEMBLY1. Install the sleeve and the gear and hub assembly by matching the alignment marks.NOTE:• Make sure that there is no large clearance at both sides of the 1st-2nd shifting insert after assembly.(A)1st-2nd shiftin ...

© 2016-2022 Copyright www.sucross.com