WIRING SYSTEM > Bulkhead Wiring Harness (In Engine Compartment)
LOCATION
Connector | Connecting to | ||||
No. | Pole | Color | Area | No. | Description |
B3 | 5 | Black | B-2 | Mass air flow and intake air temperature sensor | |
B6 | 2 | Light gray | C-3 | Front ABS wheel speed sensor RH | |
B8 | 5 | Light gray | B-5 | Front wiper motor | |
B10 | 4 | Light gray | C-4 | Pressure switch | |
B11 | 12 | Light gray | B-4 | T4 | Transmission cord (CVT model) |
B12 | 16 | Dark gray | B-4 | T3 | |
B14 | 1 | Black | B-4 | Starter motor | |
B15 | 2 | Light gray | C-5 | Front ABS wheel speed sensor LH | |
B16 | 2 | Gray | B-5 | Brake fluid level switch | |
B21 | 54 | Black | B-3 | E2 | Engine wiring harness |
B22 | 16 | Brown | B-3 | ||
B24 | 2 | Gray | B-3 | T1 | Back-up light switch (MT model) |
B25 | 2 | Brown | C-3 | T2 | Neutral position switch 1 |
B143 | 20 | B-5 | M/B | ||
B144 | 9 | Brown | B-5 | ||
B145 | 7 | Brown | B-5 | ||
B146 | 2 | Black | C-4 | Front washer motor | |
B147 | 2 | Gray | C-4 | Rear washer motor | |
B164 | 2 | Gray | B-2 | Keyless buzzer | |
B177 | 2 | Gray | B-4 | Wiper deicer | |
B186 | 8 | B-5 | M/B | ||
B310 | 26 | Black | B-3 | VDC CM (with EyeSight) | |
38 | B-3 | VDC CM (without EyeSight) | |||
B321 | 2 | Black | B-3 | Hood switch | |
B360 | 16 | Gray | B-5 | F109 | Through joint connector |
B361 | 14 | B-5 | F108 | ||
B396 | 2 | Brown | C-4 | Washer fluid level sensor | |
B432 | 8 | Black | C-4 | SBF holder | |
B450 | 10 | Black | B-3 | Power steering CM | |
B451 | 6 | Gray | B-3 | Torque sensor | |
B452 | 2 | Black | B-3 | Power steering CM | |
B523 | 2 | Light gray | C-5 | Battery temperature sensor | |
B538 | 3 | Black | C-4 | Battery current sensor | |
B567 | 26 | B-2 | Relay holder | ||
B571 | 2 | B-5 | M/B | ||
: White or natural color |
Connector | Connecting to | ||||
No. | Pole | Color | Area | No. | Description |
AB13 | 2 | Yellow | C-3 | Front sub sensor LH | |
AB16 | 2 | Yellow | B-1 | Front sub sensor RH | |
: White or natural color |
Electrical specification
CONTROL SYSTEMS > AT Shift Lock Control SystemELECTRICAL SPECIFICATION• Model without push button ignition switchItemConnector No.Terminal No.Input/Output signalMeasured value and measuring conditionsBattery power supplyB28169 — 16 V7i846Ignition power supplyB2803210 — 15 V when ignitio ...
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Inhibitor SwitchADJUSTMENT1. Shift the select lever to “N” range.2. Loosen the two bolts holding the inhibitor switch.3. Insert the ST vertically into the holes of the shifter arm and switch body.ST 499267300STOPPER PIN4. Tighten the two ...
Dtc p0965 pressure control solenoid "b" control circuit range/performance
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0965 PRESSURE CONTROL SOLENOID "B" CONTROL CIRCUIT RANGE/PERFORMANCEDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine speed increases abrup ...