Subaru Crosstrek Owners Manual: Brake pedal
Check the brake pedal free play and reserve distance according to the maintenance schedule in the "Warranty and Maintenance Booklet".
Brake booster
If the brake booster does not operate as
described in the following, have it checked
by your SUBARU dealer.
1. With the ignition switch in the "LOCK"/
"OFF" position, depress the brake pedal
se ...
Checking the brake pedal free play
1) 0.02 - 0.11 in (0.5 - 2.7 mm)
Turn the ignition switch to the "LOCK"/
"OFF" position and firmly depress the
brake pedal several times. Lightly pull
the brake pedal up with one finger to
ch ...
Other materials:
Installation
BRAKE > Brake BoosterINSTALLATION1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly ...
Dtc b1630 curtain airbag sensor rh failure
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1630 CURTAIN AIRBAG SENSOR RH FAILUREDIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor (RH) is faulty.If DTC B1630 is displayed, the circuit within the curtain airbag sensor ...
Electrical specification
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATION• Models without EyeSightNOTE:• Terminal numbers in VDCCM&H/U connector (on the control module side) are shown in the figure.• When the connector is removed from the VDCCM&H/U ...
