Subaru Crosstrek Owners Manual: Bluetooth audio
The Bluetooth audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication.
This audio system supports Bluetooth, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth, the Bluetooth audio system will not function.
WARNING
- Do not operate the player's controls
or connect to the Bluetooth
audio system while driving.
Doing so may result in loss of control of your vehicle and cause an accident or serious injury.
- Your audio unit is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy- pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth antennas. The radio waves may affect the operation of such devices.
- Before using Bluetooth devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.
CAUTION
Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player.
How to change the source
The iPod operation screen can be
reached by the following methods:
Connect an iPod. Refer to "Connecting
and disconnecting a USB memory/portable
device"
Select the "USB/iPod" key on the
s ...
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Select to display as a list (for the
models with ...
Other materials:
Disassembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorDISASSEMBLY1. Remove the cap from the generator.2. Remove four bolts.3. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — 140°F).4. Insert a flat tip screwdriver or similar tool wrapped with protective tape into ...
Waxing and polishing
Before applying wax or polish to your Subaru Ascent, always ensure that the vehicle
has been thoroughly washed and completely dried. This prevents dirt or debris from
being trapped under the wax layer, which could otherwise damage the paint surface.
Use only high-quality automotive waxes and po ...
Replacement
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Differential Side Retainer Oil SealREPLACEMENT1. Disconnect the ground cable from battery.2. Remove the front tires.3. Lift up the vehicle.4. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.CAUTION:• ...
