Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Before checking or servicing in the engine  compartment

Subaru Crosstrek Owners Manual / Maintenance and service / Maintenance precautions / Before checking or servicing in the engine  compartment

WARNING

Always stop the engine and apply the parking brake firmly to prevent the vehicle from moving.

Always let the engine cool down.

Engine parts become very hot when the engine is running and remain hot for some time after the engine has stopped.

Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components.

This may cause a fire.

When the ignition switch is in the "ON" position, the cooling fan may operate suddenly even when the engine is stopped. If your body or clothes come into contact with a rotating fan, that could result in serious injury. To avoid risk of injury, perform the following precautions.

Before performing any servicing on a vehicle equipped with a remote engine start system (a dealer option), temporarily place the remote engine start system in service mode to prevent it from unexpectedly starting the engine.

Maintenance precautions
When maintenance and service are required, it is recommended that all work be done by an authorized SUBARU dealer. If you perform maintenance and service by yourself, you should familiarize your ...

When checking or servicing in the engine compartment
CAUTION Do not contact the drive belt cover while checking the components in the engine compartment. Doing so may cause your hand to slip off the cover and result in an unexpected ...

Other materials:

Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center DifferentialINSPECTION1. Ball bearingReplace the bearings in the following cases.• In case of broken or rusty bearings• In case of worn or damaged bearings• When the bearings fail to turn smoothly or emit noise in rotation after ...

Dtc p0131 a/f / o2 sensor circuit low voltage bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0131 A/F / O2 SENSOR CIRCUIT LOW VOLTAGE BANK 1 SENSOR 1DTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...

Electrical specification
EyeSight (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATION1. STEREO CAMERATerminal No.ContentMeasuring conditionStandard(R137) No. 1 — — — (R137) No. 2 — — — (R137) No. 3 — — — (R137) No. 4 — — — (R137) No. 5 — — — (R137) No. 6 ←> Ch ...

© 2016-2025 Copyright www.sucross.com