Subaru Crosstrek Owners Manual: Basic screens
By operating the "
" or "
" switch on the
steering wheel, you can change the
screen that is always displayed.
Default screen
Digital speedometer
Menu screen entering screen
While this screen is selected, pull the "
/
SET" switch to enter the menu screen.
Warning screen
Example of warning
If there is a warning message or a
maintenance notification, it will appear for
approximately 3 seconds. Take the appropriate
actions based on the messages
indicated. ...
Menu screens
Pull the "
/SET" switch to enter the menu
screens when all of the following conditions
are satisfied.
The vehicle has been completely
stopped.
The select lever is in the "P" position.
...
Other materials:
Control screen and audio panel
Control screen
Perform the SXM setting. See below.
Refer to "SXM setting" F5-42.
Search for a channel which the
direction of higher frequency from
current frequency. Reproduce the
channel that can receive by 5
seconds.
A list is displayed. There are three
types of lists ("P ...
General diagnostic table Inspection
REAR SUSPENSION > General Diagnostic TableINSPECTION1. IMPROPER VEHICLE POSTURE OR IMPROPER WHEEL ARCH HEIGHTPossible causeCorrective action(1) Permanent distortion or damaged coil springReplace.(2) Rough operation of shock absorberReplace.(3) Installation of the wrong shock absorberReplace with ...
Preparation tool
ENTERTAINMENT > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to “App ...
